COMPLETE KIT READY TO USE - Perfect for breaking down all the limescale in your home, thus protecting your systems and appliances (save on descaler and all detergents)
40 Liters Double Body Resin (Suitable for 10/12 people)
Eliminate limescale from the water forever!
Active Cost once Mounted: Salt Refill (The Number of Refills depends on Water Consumption)
Venezia double body water softener with Autotrol valve 40lt. resin (reg. volume-time) electronic
Automatic electronic valve Clack WS1CI 1" regeneration Volume/time. Low consumption of water and salt for each regeneration. Valve body in Noryl plastic material, NSF listed. Simple programming, time entry, day of week entry, regeneration time, generally 02.00 at night, number of days between regenerations and input hardness. Complete with 12/230V – 50Hz European plug power supply socket. Regulator output hardness. An output hardness of around 15°F is recommended, however the most frequently used setting is no lower than 5°F. Loosening the adjustment screw will reduce the mixing with raw water at the outlet. To mix a specific output hardness value, adjust the screw and test the water. Repeat the procedure until the desired hardness value is reached.
ATTENTION:
• The water softeners are supplied without salt, the use of salt tablets is recommended.
• The cylinders are supplied full up to the 40lt version and with the valve already mounted. For higher versions all components must be assembled by specialized personnel.
A bypass valve system shall be installed on all systems. Bypass valves isolate the appliance from the water system and allow the use of untreated water. Routine maintenance or service may also require the system to be placed on bypass.
Benefits and advantages
Reduction of water hardness, which causes encrustations. ENERGY SAVING: the device prevents the formation of encrustations in pipes and ducts. Greater sense of well-being during the shower. Soft and clean skin. Increased life of household appliances and boilers. FINANCIAL SAVINGS: reduction in the use of soaps, fabric softeners and chemical products. Reduced maintenance costs. Fully automatic operation. You only need to worry about adding salt to the water softener.
Characteristics
• Min. pressure: 1.4bar(1.4kg/cm2)
• Max. pressure: 8.6bar(8.6kg/cm2)
• Min temperature: 4°C
• Max temperature: 43°C
• Water inlet/outlet 1″ male thread
• Drain: hose connection with 2m. of tube
• Overflow: 3/8″ hose connection
Specifications of the 40lt model. resin. Suitable for 10/12 people
• Exchange capacity: 200ºHFxm3.
• Regeneration salt consumption: 5.20 Kg./salt.
• Regeneration water consumption: 280lt.
• Quantity of water treated for regeneration, 30°F-6.66m3, 35°F-5.71m3, 40°F-5.00m3, 45°F-4.44m3, 50°F-4.00m3, 60°F-3.33m3.
• Max. flow rate 1.56m3/h
ACCESSORIES INCLUDED:
– Double body water softener
– By-pass valve + connectors
– Fittings
– Instruction booklet
Water Softener 40 Liters Alabama Double Body quantity
1