Automatic electronic valve Clack WS1CI 1" regeneration Volume/time. Low consumption of water and salt for each regeneration. Valve body in Noryl plastic material, NSF listed.
Simple programming, time entry, day of week entry, regeneration time, generally 02.00 at night, number of days between regenerations and input hardness. Complete with 12/230V – 50Hz European plug power supply socket. Output hardness regulator.
An output hardness of around 15°F is recommended, however the most frequently used setting is no lower than 5°F. Loosening the adjustment screw will reduce the mixing with raw water at the outlet.
To mix a specific output hardness value, adjust the screw and test the water. Repeat the procedure until the desired hardness value is reached. To check the hardness at entry/exit from the device, we recommend purchasing the code. 13000001 Titrant Kit total hardness (1°F) single reagent 15cc.
TO BE PURCHASED WITH EVERY SOFTENER
1x 15010302 Clack WS1 / WS1TC Bypass Valve
1x 02001014-02 Standard container 3 pieces 10" transparent IN-OUT 1" with key and bracket
2x 04001006-05 Ionicore cartridge Polypropylene wrapped 9-3/4" - 50 micron
1x 13000001 Titrant Kit total hardness (1°F) single reagent 15cc.
* The water softeners are supplied without salt, the use of salt tablets is recommended.
The device is supplied programmed with an inlet hardness of 40°F, an outlet hardness of 0°F and a safety regeneration every 7 days. The bypass valve (if ordered) isolates the appliance from the water system to allow the use of untreated water. Routine maintenance or service may also require the system to be placed on bypass.
Characteristics:
* Simple and intuitive programming
* Solid state microprocessor with front panel settings.
* Large LCD display.
* 48 hours of internal power backup.
* Real time of the day expressed in hours and minutes.
* Residual volume of softened water.
* Display of regeneration phases and remaining cycle time.
* Quick and easy configuration of capacity, time and day of regeneration.
* The set programming remains in memory and will not be lost in the event of a power outage.
* Step-by-step electronic regeneration.
* Manual, delayed or immediate regeneration.
* Salt shortage alarm.
Benefits and Advantages
Reduction of water hardness, which causes encrustations. ENERGY SAVING: the device prevents the formation of encrustations in pipes and ducts. Greater sense of well-being during the shower. Soft and clean skin. Increased life of household appliances and boilers. FINANCIAL SAVINGS: reduction in the use of soaps, fabric softeners and chemical products. Reduced maintenance costs. Fully automatic operation. You only need to worry about adding salt to the water softener.
Increased sodium(For drinking water)
Most of the sodium consumed is taken in with foods, especially those obtained through industrial processing. Salt is an excellent preservative and is therefore used as an additive for processed products. Sodium intake from the water we drink is relatively low compared to that from food. All softeners to produce softened water through ion exchange in the resins produce sodium ions in the softened water output. The recommended sodium limit for water intended for human consumption is 200 ppm liter. Depending on the sodium concentration and the hardness of the water, it is possible that the water has a higher sodium concentration than recommended. In cases where this occurs or if it is necessary to follow a low-salt diet, we recommend installing a domestic reverse osmosis device for drinking water.
Characteristics
* Min. pressure: 1.4bar(1.4kg/cm2)
* Max. pressure: 8.6bar(8.6kg/cm2)
* Min temperature: 4°C
* Max temperature: 43°C
* Water inlet/outlet 1" male thread
* Drain: hose connection with 2m. of tube
* Overflow: 3/8" hose connection
Model specifications 15000203-08 8lt. resin. (suitable for 1/2 people)
* Exchange capacity: 41.6ºHFxm3.
* Salt consumption per regeneration: 1.04 Kg./salt.
* Regeneration water consumption: 56lt.
* Quantity of water treated for regeneration, 30°F-1.38m3, 35°F-1.18m3, 40°F-1.04m3, 45°F-0.92m3, 50°F-0.83m3, 60°F-0.69m3.
* Max. flow rate 0.32m3/h
Model specifications 15000203-12 12lt. resin. (suitable for 2/3 people)
* Exchange capacity: 62.4ºHFxm3.
* Regeneration salt consumption: 1.56 Kg./salt.
* Regeneration water consumption: 84lt.
* Quantity of water treated for regeneration, 30°F-2.08m3, 35°F-1.78m3, 40°F-1.56m3, 45°F-1.38m3, 50°F-1.24m3, 60°F-1.04m3.
* Max. flow rate 0.54m3/h
Model specifications 15000203-15 15lt. resin. (suitable for 3/4 people)
* Exchange capacity: 75ºHFxm3.
* Regeneration salt consumption: 1.95 Kg./salt.
* Regeneration water consumption: 105lt.
* Quantity of water treated for regeneration, 30°F-2.5m3, 35°F-2.14m3, 40°F-1.87m3, 45°F-1.66m3, 50°F-1.50m3, 60°F-1.25m3.
* Max. flow rate 0.67m3/h
Model specifications 15000203-20 20lt. resin. (suitable for 4/6 people)
* Exchange capacity: 100ºHFxm3.
* Regeneration salt consumption: 2.6 Kg./salt.
* Regeneration water consumption: 140lt.
* Quantity of water treated for regeneration, 30°F-3.33m3, 35°F-2.85m3, 40°F-2.5m3, 45°F-2.22m3, 50°F-2.00, 60°F-1.66m3.
* Max. flow rate 0.9m3/h
Model specifications 15000203-25 25lt. resin. (suitable for 6/8 people)
* Exchange capacity: 125ºHFxm3.
* Salt consumption per regeneration: 3.25 Kg./salt.
* Regeneration water consumption: 175lt.
* Quantity of water treated for regeneration, 30°F-4.16m3, 35°F-3.57m3, 40°F-3.12m3, 45°F-2.77m3, 50°F-2.50m3, 60°F-2.08m3.
* Max. flow rate 1.12m3/h
Model specifications 15000203-30 30lt. resin. (suitable for 6/8/10 People)
* Exchange capacity: 150ºHFxm3.
* Regeneration salt consumption: 3.90 Kg./salt.
* Regeneration water consumption: 210lt.
* Quantity of water treated for regeneration, 30°F-5.00m3, 35°F-4.28m3, 40°F-3.75m3, 45°F-3.33m3, 50°F-3.00m3, 60°F-2.50m3.
* Max. flow rate 1.35m3/h
Model specifications 15000203-40 40lt. resin.
* Exchange capacity: 200ºHFxm3.
* Salt consumption upon regeneration: 5.20 Kg./salt.
* Regeneration water consumption: 280lt.
* Quantity of water treated for regeneration, 30°F-6.66m3, 35°F-5.71m3, 40°F-5.00m3, 45°F-4.44m3, 50°F-4.00m3, 60°F-3.33m3.
* Max. flow rate 1.56m3/h
Model specifications 15000203-50 50lt. resin.
* Exchange capacity: 250ºHFxm3.
* Regeneration salt consumption: 6.50 Kg./salt.
* Regeneration water consumption: 350lt.
* Quantity of water treated for regeneration, 30°F-8.33m3, 35°F-7.14m3, 40°F-6.25m3, 45°F-5.55m3, 50°F-5.00m3, 60°F-4.16m3.
* Max. flow rate 1.56m3/h
* In the double block the cylinders are supplied full up to the 40lt version.
Model specifications 15000203-60 60lt. resin.
* Exchange capacity: 300ºHFxm3.
* Regeneration salt consumption: 7.80 Kg./salt.
* Regeneration water consumption: 420lt.
* Quantity of water treated for regeneration, 30°F-10.00m3, 35°F-8.57m3, 40°F-7.50m3, 45°F-6.66m3, 50°F-6.00m3, 60°F-5.00m3.
* Max. flow rate 2.21m3/h
* In the double block the cylinders are supplied full up to the 40lt version.
Model specifications 15000203-70 70lt. resin.
* Exchange capacity: 350ºHFxm3.
* Salt consumption upon regeneration: 9.10 Kg./salt.
* Regeneration water consumption: 490lt.
* Quantity of water treated for regeneration, 30°F-11.66m3, 35°F-10.00m3, 40°F-8.75m3, 45°F-7.77m3, 50°F-7.00m3, 60°F-5.83m3.
* Max. flow rate 2.63m3/h
* In the double block the cylinders are supplied full up to the 40lt version.
Model specifications 15000203-75 75lt. resin.
* Exchange capacity: 375ºHFxm3.
* Regeneration salt consumption: 9.75 Kg./salt.
* Regeneration water consumption: 525lt.
* Quantity of water treated for regeneration, 30°F-12.50m3, 35°F-10.71m3, 40°F-9.37m3, 45°F-8.33m3, 50°F-7.50m3, 60°F-6.25m3.
* Max. flow rate 2.63m3/h
* In the double block the cylinders are supplied full up to the 40lt version.
Model specifications 15000203-80 80lt. resin.
* Exchange capacity: 400ºHFxm3.
* Regeneration salt consumption: 10.40 Kg./salt.
* Regeneration water consumption: 560lt.
* Quantity of water treated for regeneration, 30°F-13.33m3, 35°F-11.42m3, 40°F-10.00m3, 45°F-8.88m3, 50°F-8.00m3, 60°F-6.66m3.
* Max. flow rate 2.63m3/h
* In the double block the cylinders are supplied full up to the 40lt version.
Model specifications 15000203-1A 100lt. resin.
* Exchange capacity: 500ºHFxm3.
* Regeneration salt consumption: 13 Kg./salt.
* Regeneration water consumption: 700lt.
* Quantity of water treated for regeneration, 30°F-16.66m3, 35°F-14.28m3, 40°F-12.50m3, 45°F-11.11m3, 50°F-10.00m3, 60°F-8.33m3.
* Max. flow rate 3.31m3/h
* In the double block the cylinders are supplied full up to the 40lt version.
Model specifications 15000203-1B 125lt. resin.
* Exchange capacity: 625ºHFxm3.
* Regeneration salt consumption: 16.25 Kg./salt.
* Regeneration water consumption: 875lt.
* Quantity of water treated for regeneration, 30°F-20.83m3, 35°F-17.85m3, 40°F-15.63m3, 45°F-13.88m3, 50°F-12.50m3, 60°F-10.42m3.
* Max. flow rate 3.31m3/h
* In the double block the cylinders are supplied full up to the 40lt version.
Model specifications 15000203-1C 150lt. resin.
* Exchange capacity: 750ºHFxm3.
* Regeneration salt consumption: 19.50 Kg./salt.
* Regeneration water consumption: 1,050lt.
* Quantity of water treated for regeneration, 30°F-25.00m3, 35°F-21.42m3, 40°F-18.75m3, 45°F-16.66m3, 50°F-15.00m3, 60°F-12.50m3.
* Max. flow rate 4.25m3/h
* In the double block the cylinders are supplied full up to the 40lt version.
Model specifications 15000203-1D 200lt. resin.
* Exchange capacity: 1,000ºHFxm3.
* Regeneration salt consumption: 26.00 Kg./salt.
* Regeneration water consumption: 1,400lt.
* Quantity of water treated for regeneration, 30°F-33.33m3, 35°F-28.57m3, 40°F-25.00m3, 45°F-22.22m3, 50°F-20.00m3, 60°F-16.66m3.
* Max. flow rate 5.18m3/h
* In the double block the cylinders are supplied full up to the 40lt version.