Characteristics:
*Automatic water flow lock upon electronic sensor detection
* Runs on a 9v battery.
* Automatic flow lock when battery is completely discharged
* Easy installation
* Protection for water filters and softeners.
Specifications:
* Working voltage: 9V DC
* Supply current: typical 1.0 mA, maximum 15.0 mA.
* Cable length: 1.5m cable to solenoid valve
* Leak detection method: The control unit must be grounded under or near the filter with the metal sensor towards ground and the display upwards.
* Operating temperature: -20 ~ 80°C.
* Maximum pressure AS-414: 6 Bar
* Maximum pressure AS-413BR, AS-414BR: 8 Bar
Instructions for use
Installation:
1-Install the solenoid valve on the main water inlet line of the system.
Working Reset:
2-Hold the button for 4 seconds, the control unit opens the inlet solenoid valve to let the water flow into the system and the control unit generates a long "Beep" sound.
3-Block the unit when a water leak is detected.
The control unit closes the incoming solenoid valve generating a continuous "Beep-Beep" sound and a consequent flashing of the blue LED on the front. Once the problem has been solved, hold the button down for 4 seconds and the control unit opens the solenoid valve again and the water begins to flow back into the system.
4-Red battery LED.
Before turning off completely, the system emits a low battery alarm. If it is not replaced, the system goes into protection lockout and resets again upon replacement with a charge.