NAMI Direct Reverse Osmosis 800GPD - SYSTEM COMPLETE WITH EVERYTHING AND READY TO INSTALL EASY AND QUICKLY
Buying Guide on NAMI! Click below to watch the video on Youtube👇🏻
NAMI is a latest generation reverse osmosis system, designed to offer the best performances by adapting to the characteristics and spaces of all kitchens. This system is capable of producing up to 2 liters per minute of osmotic water thanks to its 800 GPD membrane.
Annual filter change at a cost of €80 + Membrane change every 4/5 years at a cost of €159
Filtration
Filter 1: Sediments + Carbon Block
Filter 2: RO membrane 800 GPD + Carbon Gac
Filter replacement
Once the incoming water has been closed and the system has been turned off, simply remove the filter cover, press the cartridge replacement button and the corresponding filter will release to be able to be removed. Now you can insert the new filter into the seat until you hear a "click" of fixing, and hold the reset button pressed for 3 seconds to restore the life of the new filter.
Smart faucet
The LED on the tap shows you the quality of the water supplied and provides you with a reminder to replace the filters.
Technical specifications:
- Rated voltage/frequency: 100-240V. - 50/60 Hz
- Rated power: 75W.
- Inlet water pressure: 0.1-0.4 MPa (1-4 bar)
- Outlet water flow: 2 lt./min.
- Operating temperature: 4-40 °C
- Dimensions (mm.): 425x130x252
Components included in the package:
1x Red PE hose 1/4" (2mt.)
1x Blue PE hose 1/4" (2mt.)
1x PE hose 3/8" (2mt.)
5x Cable ties
1x Instruction Manual
1x Smart Faucet
1x Exhaust Clip
10x Clips 1/4"
5x Clips 3/8"
1x Transformer
1x 3-way ball valve
1x Elbow with shank Ø tube - Ø shank 3/8" x 3/8"
2x Elbow with shank Ø tube - Ø shank 1/4"
1x Straight union Ø tube - Ø tube 1/4" x 1/4"
Reverse osmosis is not a device that makes water drinkable (non-potable water in drinking water) and only works if it is installed on water that complies with the law, municipal or well drinking water if previously made drinkable with adequate and effective systems, previously studied and customized for that type of water.
Do not use the system where the water is microbiologically hazardous or of unknown quality without adequate disinfection upstream and downstream of the system. All systems must be preserved according to the manufacturer's instructions.
The pollutants removed or reduced by this system are not necessarily in your water.
If the incoming drinking water is of poor quality, it is possible to close the entire salt regulator (TDS) and mount a remineralising filter that stabilizes Ph as the last stage.
1x Ionicore in-line filter remineralizer and PH regulator (GAC) coconut 1/4" FPT 2"x10".